Clubmaker 30/60 Epoxy-1/2 Pint $19.99 Clubmaker 30/60 Epoxy ( 1/2 Pint) Two economy-priced bottles of our most popular syringe epoxy. Features: Sets in 30 minutes Cures to black Two 4 oz. bottles, 120 clubs Safety information Part A (47kb) and Safety information Part B (45kb)

Clubmaker Hardman Quik Epoxy $1.99 Hardman Quik Epoxy This fast-setting epoxy uses a Double/Bubble(R) system to eliminate fuss and mess in your shop. Simply fold the packet in half lengthwise, clip the end with a pair of scissors, squeeze out the two-part adhesive, mix thoroughly and apply. Work time is 3-5 minutes, and each packet contains 3.5 grams of epoxy. Safety information Part A (23kb) and Safety information Part B (24kb)

Clubmaker Shafting Epoxy-1/2 Pint Black $9.99 Clubmaker Shafting Epoxy-1/2 Pint Black This tour-tested formula works on virtually any shaft material. Also tightens and bonds inserts and soleplates-or whenever two separate parts need to be bonded together. Features: Lap shear strength of 2850 psi Breaks down at 250 deg F Cures to black color in approximately 18 hours Two 4 oz. bottles shaft approximately 120 clubs Safety information Part A (22kb) and Safety information Part B (22kb)

Clubmaker Shafting Epoxy-QT Black $19.99 Clubmaker Shafting Epoxy-QT Black This tour-tested formula works on virtually any shaft material. Also tightens and bonds inserts and soleplates-or whenever two separate parts need to be bonded together. Features: Lap shear strength of 2850 psi Breaks down at 250 deg F Cures to black color in approximately 18 hours Two 16 oz. bottles shaft approximately 480 clubs Safety information Part A (22kb) and Safety information Part B (22kb)

Golfsmith 30/60 Epoxy Syringe $9.99 Golfsmith 30/60 Epoxy Syringe An instant favorite of our own repair and production department, this super strong 30/60 Epoxy Syringe formula has a 30 minute working time and sets to playing strength in about an hour (depending upon air conditions). Perfect for assembling a full set of clubs; cures black. Safety information Part A (47kb) and Safety information Part B (45kb)

Golfsmith Epoxy Mix Cups-Pack Of 25 $2.99 Small plastic cups are graduated in ounces, grams, tablespoons and milliliters/CCs for accuracy; each holds enough to shaft a full set of clubs. Package of 25.

Golfsmith Epoxy Syringe $7.99 Golfsmith Epoxy Syringe Parts A and B of this epoxy mix at a 1:1 ratio to easily tighten and bond inserts, sole plates or anything else you need. The convenient, resalable syringe holds 1.7 oz., epoxies approximately 25 clubs and breaks down at 250 deg F. Safety information Part A (23kb) and Safety information Part B (23kb)

Golfsmith Epoxy Syringe Gun $29.99 Golfsmith Epoxy Syringe Gun: The Epoxy Syringe Gun is the superior epoxy syringe applicator that fits all Golfsmith epoxy syringes. The syringe installs in seconds and the gun guarantees a smooth, even flow of both activator and base. Durable, precision molded parts make application a cinch.

Golfsmith Mix Sticks-Pack Of 100 $2.99 Mix sticks are very effective for mixing epoxy.

Golfsmith Rattle Stopper 1 oz Package $8.99 Golfsmith Rattle Stopper (1 oz. Package) This one-piece, reusable thermoplastic glue with syringe applicator offers a permanent solution to solving problems associated with clubheads that develop a rattle. The glue catches loose debris in metal wood heads, such as fly-paper. Just drill a 1/8 in. hole in the sole of a metal wood then inject the glue into the hole, plug, sand and polish. Safety information (2Mb)

Golfsmith Shafting Beads-4 0z. $5.99 Golfsmith Shafting Beads (4 oz.): Make sure your shafts are straight with these Golfsmith Shafting Beads. Tiny glass oxide granules (.0021 in. diameter) are mixed with shafting epoxy to ensure an adequate epoxy cushion between the shaft and hosel wall which eliminates the possibility of shafting a club cocked or off-center. Add the beads to mixed epoxy at 3% to 5% by volume (about 1/4 level teaspoon per ounce) and mix thoroughly. This convenient 4-ounce jar provides enough beads to shaft hundreds of clubs.

Golfsmith Shafting Epoxy With Shafting Beads $10.99 Golfsmith Shafting Epoxy with Shafting Beads This epoxy combines the super strong bonding power Golfsmith epoxies are known for with shaft aligning beads in a convenient syringe. Aligning beads ensure a straight and centered shaft installation every time and provide a worry-free epoxy cushion between the shaft and hosel wall. The convenient syringe dispenses an exact 1:1 mix of activator and base. WARNING: This product contains a chemical known to the State of California to cause cancer and reproductive harm. Safety information Part A (23kb) and Safety information Part B (23kb)

Golfsmith Skinny Mix Sticks $2.99 These mixing sticks fit easily into a clubheads hosel, as well as Golfsmiths Hosel Weight Port System, for easier epoxy application. Package of 100.

Golfsmith Tour Van Shafting Epoxy $10.99 Golfsmith Tour Van Shafting Epoxy This professional formula sets in just five minutes. Tour Van Shafting Epoxy is used by major shaft manufacturers in their pro tour vans because it is ideal for jobs that require a strong bond in a hurry. The large syringe container makes 1.5 ounces of epoxy (more than enough for a full set of clubs) and ensures a precise 1:1 mix. WARNING: This product contains a chemical known to the State of California to cause cancer and reproductive harm. Safety information Part A (2Mb) and Safety information Part B (2.1Mb)