Clubmaker Ferrule Shield for Callaway Woods $14.99 Ferrule Shield for Callaway Woods This tool removes shafts from Callaway metal woods without damaging either the shaft or the special ferrule. Used in conjunction with a heating rod, its high compression nylon sleeve protects the ferrules while allowing the head to be pushed from the shaft. Instruction manual (26kb)

Clubmaker Single .350 To .335 Converter $0.75 Shaft Sleeve Adaptor .350 to .335 Converter Fits TaylorMade, Orlimar, and Callaway metal woods

Golfsmith .335 Black Wood Ferrule Dozen $2.49 Golfsmith .335 Black Wood Ferrule Dozen Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .335 in. O.D.: 12.4 mm Length: 16 mm Black

Golfsmith .335 To .350 Converter Dozen $5.99 Golfsmith .350 to .335 Converter (One dozen): These shaft sleeve adapters help convert .350 in. diameters to .335 in.. Fits TaylorMade and Callaway metal woods.

Golfsmith .350 Wood Ferrule Pack Of 12 $2.99 Ferrules are required on metal clubheads with flat-topped (non-raduiused) hosels to provide the taper and enhance the appearence of the club. Many Golfsmith(R) ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

Golfsmith .370 Black Iron Ferrule Dozen $2.49 Golfsmith .370 Black Iron Ferrule Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearence of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 13.4 mm Length: 15 mm Black

Golfsmith 1/2 in. X .350 Black Wood Ferrules Dozen $2.99 Golfsmith 1/2 in. X .350 Black Wood Ferrules Dozen Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .350 in. O.D.: 13.2 mm Length: 14 mm Black

Golfsmith 695 Adjustable Shaft Piece $14.99 Golfsmith 695 Adjustable Shaft Piece The Golfsmith 695 Adjustable Shaft Piece increases or decreases the launch angle of the 695TI Driver Head by one degree. There are multiple positions that allow you to increase or decrease the loft. With every adjustment, the face angle and spin rate changes.

Golfsmith Black .370 Ferrule Pack of a Dozen $3.99 365ui Iron Ferrule: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 13.5 mm Length: 6.4 mm Black

Golfsmith Black Ferrule .370 14.2 O.D. Pack of a Dozen $3.49 Golfsmith Black Iron Ferrule Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 14.2 mm Length: 19.5 mm Black

Golfsmith Black Iron Ferrule-Dozen $2.99 Golfsmith Black Iron Ferrule Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 13.8 mm Length: 22 mm Black

Golfsmith Brass Shaft Shims (PKG Of 12) $6.99 Golfsmith Brass Shaft Shims (12-pack): Universal Brass Shaft Shims are the fast and easy way to fit conventional shaft tips into clubheads with oversized inside hosel diameters. One size fits all shaft tips due the shims collapsible side walls design. Maximizes bonding by allowing epoxy to seep past and adhere to both the shaft and hosel wall as well as the shim. Each .15 gauge brass shim weighs just 0.75 grams, resulting in virtually no effect on swingweight, and readily converts conventional shaft tips to fit into most oversize hosel bores, such as: .370 in. tip adapts to fit .390 in. to .410 in. hosels .335 in. tip adapts to fit .350 in. to .370 in. hosels .355 in. tip adapts to fit .370 in. to .390 in. hosels

Golfsmith Callaway .335 Lie/Face Adaptor $11.99 Golfsmith .355 Lie/Face Angle Adapter This adapter enables clubmakers to make lie and face angle changes to all newer Callaway metal woods. For use with .335 in. tip shafts. Instruction manual (47kb)

Golfsmith Diablo Hybrid Fluted Ferrule .370 $4 Golfsmith Diablo Hybrid Fluted Ferrule .370 The Golfsmith Diablo Hybrid Fluted Ferrule is critical for repairing and reshafting the Callaway Diablo Hybrid. It permits reshafting of the club with conventional shafts.

Golfsmith Ferrule Kit $59.99 Golfsmith Ferrule Kit: This convenient Ferrule Kit makes keeping up with your proline replacement sleeves a snap. The plastic case features 15 divided chambers for organizing your sleeves and a guide map on the underside of the lid for easy identification. Contains: 4 Bushing sleeves Orlimar & Cobra (.335 in. - .365 in. adapter) 4 Bushing ferrules for old TaylorMade Burners (.400 in. woods; .335 in. - .400 in. adapter) 4 Bushing ferrules for old TaylorMade Burners (.400 in. irons; .370 in. - .400 in. adapter) 4 TaylorMade RAC Ferrules for HT and CGB irons only 4 TaylorMade Series 5 adapters (.335 in. shaft tip) 4 TaylorMade Series 5 adapters (.350 in. shaft tip) 4 Wilson Fat Shaft adapters (.428 in. and .480 in.) 8 wide collar ferrules for Callaway (old and new; .335 in.) 8 wide collar ferrules for Callaway (old and new; .370 in. irons) 4 Callaway adapters for Great Big Bertha II, VFT, ERC II, Steelhead III (.335 in. shaft tip) 4 Callaway Great Big Bertha II, VFT, ERC II, Steelhead III (.350 in. shaft tip replacement) 2 Ping adapters for ISI, ISI TEC, SI-3 titanium drivers (right hand only) 2 Ping adapters for ISI & I-3 fairway woods 8 Bushing ferrules (.335 in. - .350 in. perforated adapters)

Golfsmith FT Hybrid Ferrule .370 4 pack $6.99 Golfsmith Callaway FT Hybrid Ferrule .370 4-pack The Golfsmith Callaway FT Hybrid Ferrule is critical for repairing and reshafting the Callaway FT Hybrid .370. It permits reshafting of the club with conventional shafts.

Golfsmith GBB II .335 Shaft Sleve $1.99 Golfsmith GBB II .335 Shaft Sleeve: Re-shafting Callaway metal wood heads is now easy with these adaptors. Made from a polycarbonate material, these handy .335 Shaft Sleevese will not change the feel or consistency of the golf club.

Golfsmith GBB II .350 Shaft Sleve $1.99 Golfsmith GBB II .350 Shaft Sleeve: Re-shafting Callaway metal wood heads is now easy with these adaptors. Made from a polycarbonate material, these handy .350 Shaft Sleevese will not change the feel or consistency of the golf club.

Golfsmith Graphite Shaft Plug For Woods And Iron Pack Of 12 $2.99 Graphite Shaft Plugs for Woods and Irons (12-pack): The specially molded, tapered black plastic plugs fit in the tips of graphite shafts for a nice cosmetic finish on a through-bore club reshaft.

Golfsmith Individual .335 Black Wood Ferrule $0.79 Golfsmith Individual .335 Black Wood Ferrule Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .335 in. O.D.: 12.4 mm Length: 16 mm Black

Golfsmith Individual 1/2 in. Tall x .350 Black Wood Ferrule $0.79 Golfsmith Individual 1/2 in. Tall x .350 Black Wood Ferrule Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .350 in. O.D.: 13.2 mm Length: 14 mm Black

Golfsmith Individual Short Blk Unit Wood Ferrule $0.28 Individual Short Unit Wood Ferrule

Golfsmith Individual Short Unit Iron Ferrule $0.6 Individual Short Unit Iron Ferrule

Golfsmith Iron Ferrule Short Pack Of 100 $14.99 Golfsmith Short Unitized Iron Ferrule (100-pack): Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 13.7 mm Length: 13 mm Black

Golfsmith Metalwood Hosel Disc. Plugs (PKG of 25) $2.99 Golfsmith Metalwood Hosel Disc Plugs (25-pack): Great for covering openings at the bottom of modern metal wood head hosel bores - or on top of Golfsmiths Hosel Weight Port - to prevent epoxy from dripping down and creating a rattle inside the head.

Golfsmith Oversized Collapsible Brass Shims $6.99 Golfsmith Oversized Collapsible Brass Shims: Universal copper shaft shims are a quick and easy way to fit conventional shafts with clubheads that have oversized inside diameters.

Golfsmith Ping (G5, G10, G15) and TM (R5, R7) SHAFT ADAPTORS .335 $1.99 .335 in. Shaft Adaptor This .335 in. shaft adaptor will fit PING (G5, G10, G15 and Rapture) and TaylorMade (r5 and r7) clubs.

Golfsmith Ping (G5, G10, G15) and TM (R5, R7) SHAFT ADAPTORS .350 $1.99 .350 in. Shaft Adaptor This .350 in. shaft adaptor will fit PING (G5, G10, G15 and Rapture) and TaylorMade (r5 and r7) clubs.

Golfsmith R9 .350 Ferrule and Shaft Sleeve $14.99 Golfsmith R9 .350 Ferrule and Shaft Sleeve The Golfsmith R9 .350 Ferrule and Shaft Sleeve fits all TaylorMade FCT drivers. They are not sold separately.

Golfsmith rac Ferrule for HT & CGB Irons Dozen $4.99 Golfsmith rac Ferrule for HT and CGB Irons (One dozen): Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 14 mm Length: 12.8 mm Black

Golfsmith Radiused Hosel Ferrules-Iron Dozen $2.99 Golfsmith Radiused Hosel Ferrules Iron Dozen: Create that showroom look even on those radiused hosels with these beveled ferrules. Beveled ferrules are available to achieve the same cosmetic effect on radiused hosel clubheads. Comes in package of 12. Features: I.D.: .370 in. O.D.: 13.2 mm Length: 13 mm Black

Golfsmith Rescue Fairway Ferrule 6 Pack $3.99 Golfsmith Rescue Fairway Ferrules (6-pack): Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .350 in. O.D.: 14 mm Length: 12.8 mm Black

Golfsmith Rubber O-Ring For Irons and Woods by Dozen $1.99 Billy Bobs Golf Rubber O-Ring For Irons and Woods by Dozen The Billy Bobs Golf Rubber O-Rings are made for irons and woods.

Golfsmith Shaft Sleeve $3.99 Shaft Sleeve: This shaft sleeve has an internal diameter of .335 in. and fits Ping clubs.

Golfsmith Shaft Sleeve for I-3 Fairway Wood $3.99 Shaft Sleeve for i-3 Fairway Wood: This adapter has an internal diameter of .335 in. and fits the Ping i-3 fairway woods.

Golfsmith Short Black Wood Ferrule-Dozen $2.99 Ferrules are required on metal clubheads with flat-topped (non-raduiused) hosels to provide the taper and enhance the appearence of the club. Many Golfsmith(R) ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

Golfsmith Short Unitized Iron Ferrule-Dozen $1.99 Ferrules are required on metal clubheads with flat-topped (non-raduiused) hosels to provide the taper and enhance the appearence of the club. Many Golfsmith(R) ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

Golfsmith Short Wood Ferrule Pack Of 100 $14.99 Ferrules are required on metal clubheads with flat-topped (non-raduiused) hosels to provide the taper and enhance the appearence of the club. Many Golfsmith(R) ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

Golfsmith Single Titanium Wood Ferrule .335 $0.28 Titanium Wood Ferrule .335 Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

Golfsmith Single Unit Wood Ferrule Black/Silver/Black $0.65 Golfsmith Single Unit Wood Ferrule Black/Silver/Black Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: Inside diameter: .335 in. Outside diameter: 13.2 mm Length: 14 mm Black/silver/black

Golfsmith Steel Shaft Plugs For Woods And Irons Package Of 12 $2.99 Steel Shaft Plugs for Woods and Irons (12-pack): The specially molded, tapered black plastic plugs fit in the tips of steel shafts for a nice cosmetic finish on a through-bore club reshaft.

Golfsmith Tapered Iron Ferrule Black/Gold/Black Dozen $3.99 Golfsmith Tapered Iron Ferrule Black/Gold/Black Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .355 in. T O.D.: 13.5 mm Length: 17 mm Black/gold/black

Golfsmith Tapered Iron Ferrules - Packgage Of 12 $2.29 Ferrules are required on metal clubheads with flat-topped (non-raduiused) hosels to provide the taper and enhance the appearence of the club. Many Golfsmith(R) ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

Golfsmith Taylormade/Ping Lie/Face Angle adaptor $11.99 Golfsmith Taylormade & PING Lie/Face Angle Adapter This adapter enables clubmakers to make lie and face angle changes to all newer TaylorMade or PING metal woods. For use with .335 in. tip shafts. Instruction manual (42kb)

Golfsmith Titanium Wood Ferrule Dozen .335 $3.99 Golfsmith Titanium Wood Ferrule Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .335 in. O.D.: 13.2 mm Length: 14 mm Black

Golfsmith Titleist 909D Ferrule 4 pack $6.99 Golfsmith Titleist 909D Ferrule 4 pack The Golfsmith Titleist 909D Ferrule is critical for repairing and reshafting the Titleist 909 D3 .335 drivers and fairway woods. It permits reshafting of the club with conventional shafts.

Golfsmith Unit Iron Ferrule 13.8 OD Black/Silver/Black Dozen $3.99 Golfsmith Unit Iron Ferrule 13.8 OD Black/Silver/Black Dozen Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 13.8 mm Length: 16 mm Black/silver/black

Golfsmith Unit Iron Ferrule Black/Clear/Black Dozen $3.99 Golfsmith Unit Iron Ferrule Black/Clear/Black Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 13.8 mm Length: 16 mm Black/clear/black

Golfsmith Unit Iron Ferrule Black/Silver/Black Dozen $3.99 Golfsmith Unit Iron Ferrule 13.8 OD Black/Silver/Black Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 13.8 mm Length: 16 mm Black/silver/black

Golfsmith Unit Iron Single Ferrule 13.4 OD Black $0.79 Golfsmith Unit Iron Single Ferrule 13.4 OD Black Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .370 in. O.D.: 13.4 mm Length: 16 mm Black/silver/black

Golfsmith Unit Wood Ferrule Black/Silver/Black Dozen $3.99 Golfsmith Unit Wood Ferrule Black/Silver/Black Dozen Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .350 in. O.D.: 13.7 mm Length: 15 mm Black/silver/black

Golfsmith Unit Wood Ferrule Black/Silver/Black Single $0.79 Golfsmith Unit Wood Ferrule Black/Silver/Black Single Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .350 in. O.D.: 13.7 mm Length: 15 mm Black/silver/black

Golfsmith Unit Wood Ferrules Black/Silver/Black Dozen $3.99 Golfsmith Unit Wood Ferrules Black/Silver/Black Dozen Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: Inside diameter: .335 in. Outside diameter: 13.2 mm Length: 14 mm Black/silver/black

Golfsmith Unitized Iron Ferrule Black/Gold/Black Dozen $3.99 Golfsmith Tapered Iron Ferrule Black/Gold/Black Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .355 in. T O.D.: 13.5 mm Length: 17 mm Black/gold/black

Golfsmith Unitized Iron Ferrules Dozen $3.99 Golfsmith Tapered Iron Ferrule Black/Gold/Black Dozen: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .355 in. T O.D.: 13.5 mm Length: 17 mm Black/gold/black

Golfsmith Washer Style Wood Ferrule-Dozen $3.99 Ferrules are required on metal clubheads with flat-topped (non-raduiused) hosels to provide the taper and enhance the appearence of the club. Many Golfsmith(R) ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

Golfsmith Wide Ferrule Pkg of 12 $3.99 Wide Ferrule: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. This wide ferrule is for use on Callaway Golf irons. Features: I.D.: .370 in. O.D.: .545 in. Black

Nike Nike Sumo .335 Ferrule Adapter $2.99 Nike Sumo Ferrule Adapter: Replacement ferrules are critical for repairing and reshafting todays wide assortment of clubheads. This ferrule is made for the Nike SUMO2.

Nike Sasquatch Ferrule .335 Adapter $2.99 Nike Sasquatch Ferrule Adapter: Replacement ferrules are critical for repairing and reshafting todays wide assortment of clubheads. This ferrule is made for the Nike SasQuatch.

Snake Eyes Gold Wood Ferrule 13.2 X .335 6 Pack $0.97 Snake Eyes Gold Wood Ferrule 13.2mm x .335 6-Pack: Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .335 in. O.D.: 13.2 mm Length: 12.5 mm Black/gold logo

Snake Eyes Silver Wood Ferrule 13.2 x .335 6PK $0.97 Snake Eyes Silver Wood Ferrule 13.2mm x .335 6-Pack Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning. Features: I.D.: .335 in. O.D.: 13.2 mm Length: 12.5 mm Black/silver logo

Snake Eyes Single Ferrule .335 12.5mm H, 12.3 O.D. $0.47 Snake Eyes Single Ferrule .335 12.5mm H, 12.3 O.D. Ferrules are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

Snake Eyes Single Ferrule .370, 16mm H, 13.4 O.D $0.47 Snake Eyes Single Ferrule .370, 16 mm H, 13.4 O.D The Snake Eyes Single Ferrule .370, 16 mm, 13.4 O.D are required on metal clubheads with flat-topped (non-radiused) hosels to provide the taper and enhance the appearance of the club. Many Golfsmith ferrules have outside diameters that closely match those of our clubhead hosels and thus require little or no turning.

TaylorMade .335 to .350 Converter $2.99 TaylorMade .335 to .350 Converter: Replacement sleeves make reshafting TaylorMade metal woods a snap. This sleeve converts .335 in. diameter shafts to fit TaylorMades .350 in. inside hosel diameters.

TaylorMade .350 Replacement Sleeve $2.99 TaylorMade .350 Replacement Sleeve: Replacement sleeves make reshafting TaylorMade metal woods a snap. Use this sleeve as a replacement with .350 in. tip shafts.

TaylorMade Shaft Sleeves .350 with Flight Control Technology $19.99 TaylorMade Shaft Sleeves .350 with Flight Control Technology With TaylorMade Shaft Sleeves .350 with Flight Control Technology (FCT), you can increase or decrease the launch angle of the TaylorMade R11 Driver by 1 degree. Eight different FCT positions allow you to increase or decrease loft in 5 degree increments. With every FCT adjustment comes a change in face angle, as well as spin rate. The primary difference between the R9 and R11 sleeves is found in the identification labeling of the trajectory settings. With R9, the sleeve was labeled to provide guidance for selecting trajectories for left-to-right ball flight preferences. With R11, the sleeve now serves to function as a low-to-high ball flight preference, or simply known as loft selection. The two sleeves are exactly the same in terms of construction, material, and club head installation. The R9 sleeve can fit into the R11 head, and the R11 sleeve can fit into the R9 head. There is one other small difference and that is that we have a left-handed version of the R11 sleeve. The R9 sleeve did not require a left-handed version. Includes a shaft adaptor and ferrule.